Ridgeway Plumbing & Heating

Limiting the limescale in your hot water tank can help reduce the risk of clogs, breakage, slow water output, damage, and even premature wear to ensure safety and efficiency. In addition, Corro-Protec also reduce hard water stains. Our products prevent and stop corrosion from the inside of hot water tanks of all shapes and sizes. In fact, our Powered Anode Rod boast a high level of efficiency that can adjust all water types to provide long-term protection that extends the life of your water tank.

Our Corro-Protec water heater anode rod is specially designed for all models of electric, propane and gas water heaters. By forming a protective layer on the tank welds and at its weak points, the Corro-Protec anode provides the water heater with permanent protection against corrosion. The system thus guarantees prolonged protection regardless of the water condition. Our titanium water heater anode, combined with electrical current will provide added corrosion protection and increase the life of your hot water tank.

The Corro-Protec Powered Anode Rod is a long-term protection solution compared to the existing sacrificial magnesium anode rod on the market. Powered anode can be installed in a wide range of water heater starting from 10 gallons to 120 gallons and they don't need any maintenance. The magnesium anode rod will sacrifice itself to protect the water heater. Since corrosion always attacks weaker metals first, the magnesium anode will corrode until it is about 60% consumed. After that, if you don't change the magnesium anode, the tank will start to rust and will last couple years.

Locating the anode rod in your water heater is easy, you just need to search for the ''Owner Manual'' or the ''Use & Care Manual'' of your tank. When you find the owner manual, you must look for a diagram showing the various parts of the tank (see following picture). The location of the anode should be on this diagram. If you can access it easily, it means that you have a regular hot water tank and our Corro-Protec anode will fit perfectly. If you don't see it, you may have a Bradford White where the anode is located in the hot water outlet and you need to buy the Corro-Protec for Integrated anode water heater.

Authorized Corro-Protec retailers have been carefully selected to offer you excellent service at a competitive price! If we do not have any retailers in your area, you can send us one of your favorite plumbing or water treatment store and we will take the time to contact them! In addition to selling our products, authorized Corro-Protec retailers are able to install our anodes in a simple and safe way.

Almost every hot water tank has some cathodic protection installed to protect the tank against corrosion. For RV water heater, a magnesium anode will be used as sacrificial protection. Since magnesium is a more active metal than the one used for making the water heater, magnesium will sacrifice itself to protect the tank. However, once the magnesium anode is completely consumed, corrosion will then attack the water heater directly and affect its life. When you use this kind of cathodic protection, you need to do maintenance at least once a year and verify the anode.

Keeping your water heater running efficiently is important for extending its lifespan and ensuring you have clean, high-quality water for years to come. That's why we at Corro-Protec have created the most versatile and efficient water heater anode on the market today. Our Powered Anode Rod give you the ability to extend the life of your reservoir as it undergoes even high electron transfer levels. It does this by forming a protective layer on the tank walls, especially at the weak points, providing the water heat with permanent protection against rust and corrosion regardless of the hardness of your water.